Meaning
Calculation framework used to estimate the reduction in tension within prestressing tendons over the life of a concrete structure. Eurocode 2 prestress losses account for immediate effects such as friction and anchor draw in alongside long term factors like creep and relaxation. These calculations ensure that the remaining force in the steel is sufficient to counteract applied loads and control cracking.
Initial Reduction
Friction between the tendon and the duct during the tensioning process consumes a portion of the applied jack force. Engineers calculate these Eurocode 2 prestress losses based on the curvature of the profile and the friction coefficient of the materials. Wedge set at the anchorages causes a further drop in tension as the steel pulls back into the grips.
Time Effect
Steel wires under high constant stress undergo a phenomenon where the internal tension decreases even if the overall length of the tendon remains constant. This relaxation component of Eurocode 2 prestress losses combines with the gradual shortening of the concrete member under its own sustained weight. Environmental factors such as the average ambient humidity at the project site influence the rate of creep which further reduces the effective prestress force over several decades.
These long term variables require careful estimation to ensure the serviceability of the bridge or floor system.
Design Margin
Structural safety depends on maintaining a minimum level of compression in the concrete after all reductions have occurred. An accurate assessment of Eurocode 2 prestress losses prevents the design of members that are either dangerously under-stressed or excessively heavy. The code provides standardized coefficients to model these complex interactions during the initial design phase.