Meaning
Dimensional changes that occur in molded plastic components after they have cooled and been ejected from the tool alter the final size of the part over time. When semi-crystalline resins are processed, post-crystallization shrinkage happens as the polymer chains continue to organize into denser crystalline structures after molding. This delayed movement can cause assemblies to bind or warp days after production if not accounted for during tool design.
Molecular Organization
Rapid cooling during the injection molding phase prevents polymer chains from achieving their lowest energy state immediately. Over time, these disorganized amorphous regions slowly crystallize, which brings the molecules closer together. This increase in crystallinity causes post-crystallization shrinkage to occur at a rate that depends on the storage temperature of the molded part.
Elevated temperatures accelerate this molecular reorganization, leading to rapid dimensional shifts that can distort the flatness of flat panels.
Dimensional Stability
Variations in the final dimensions of a component can cause assembly failures and functional defects. Standard practices require holding molded parts for forty-eight hours to allow post-crystallization shrinkage to stabilize before conducting quality control measurements. If parts are measured immediately after molding, the dimensions recorded can lead to false acceptance during initial inspections.
This discrepancy can result in unexpected field performance issues if left uncorrected.
Processing Influence
Control of mold temperature during production is the primary method for managing subsequent dimensional changes. High mold temperatures promote complete crystallization within the tool, which reduces the amount of delayed shrinkage that occurs after ejection. This approach increases cycle times but yields parts with superior dimensional stability over their service lives.