Meaning
Chemical grouting systems utilize expanding polymer compounds to fill subsurface voids and densify weak soil strata. During polyurethane injection, liquid components blend inside a specialized mixing gun and enter subgrade soils through small-diameter injection tubes. The liquid mixture undergoes an exothermic reaction, expanding rapidly into rigid high-density foam that displaces pore water and compresses surrounding soil particles.
The process reaches its limit once expanding foam meets equal resisting soil pressure or escapes through boundary cracks.
Expansion Dynamics
Reaction rates dictate hydro-insensitive foam expansion and density development under subgrade confinement. Hydrophobic liquid formulations react upon contact with groundwater, expanding up to thirty times their liquid volume. Radial expansion exerts multidirectional forces against surrounding subgrade layers.
High expansion ratios minimize material mass required to achieve required lift volumes.
Subsurface Penetration
Liquid polymer viscosity allows deep penetration into micro-fissures before chemical polymerization begins. Injection pressures push liquid resin through low-permeability soils and open voids beneath structural foundations. Flow velocity decreases as viscosity rises during active polymerization.
Controlled pumping schedules prevent uncontrolled material travel beyond target zones.
Structural Lift
Expanding foam generates vertical forces capable of raising settled concrete slabs to target elevations. Technicians monitor laser receivers to stop material delivery when elevation targets are met. Precision injection restores structural alignment.
Slab support improves without adding massive dead load.