Meaning
Volume reductions in concrete or plaster occur at unequal rates across a cross-section as moisture escapes into the atmosphere. This variance creates internal stresses that lead to warping or cracking, a physical behavior defined as differential drying shrinkage. The effect is prominent in large slabs where the top surface dries much faster than the bottom core.
Thick slabs suffer more from this behavior than thin members that dry evenly.
Deformation Mechanism
As moisture evaporates from the outer layer of a concrete pour, the exposed surface begins to contract. The wet interior resists this contraction, placing the surface layer under high tensile stress. Tension exceeds the early strength of the concrete and causes superficial cracks to form.
Over time, the core dries and shrinks, which may reverse some of the surface stresses but cannot heal the existing cracks.
Moisture Gradient
Measuring the difference in relative humidity between the surface and the core of a slab defines the gradient that drives the volumetric changes. Wet curing methods or chemical sealers control this moisture loss to keep the drying rate uniform. High ambient temperature combined with low humidity increases the drying speed and worsens the gradient.
An uneven gradient is most severe in the first few weeks after pouring.
Structural Damage
Severe curling at the corners of floor slabs occurs when the top surface shrinks more than the lower portion. This curling leaves a void beneath the slab edges. When heavy vehicles drive over these unsupported corners, the concrete cracks under the wheel loads.