Meaning
A physical bending or bowing of the large metal plates that hold a mold in an injection molding machine occurs when extreme pressure is applied during the injection cycle. Tooling deflection platen flex can lead to issues like part flash or uneven wall thickness. This movement happens because the force of the molten plastic pushing outward can sometimes exceed the local rigidity of the machine platens.
Clamping Force
The machine must apply enough pressure to keep the mold closed against the internal pressure of the plastic. If the clamping force is concentrated in a small area or if the platens are not stiff enough, tooling deflection platen flex will occur in the center of the mold. This deformation allows the mold halves to separate slightly, leading to the leakage of material and the creation of flash on the finished parts.
High injection pressures exacerbate this mechanical failure.
Mold Support
Using support pillars and ensuring the mold base is properly sized for the machine can help mitigate the effects of bending. When tooling deflection platen flex is suspected, engineers may add more support to the center of the mold or move the tool to a machine with thicker platens. This intervention restores the flatness of the mold faces.
Structural Integrity
Maintaining the alignment of the mold halves is essential for protecting the features of the tool. Over time, repeated tooling deflection platen flex can cause the guide pins and bushings to wear unevenly, leading to a loss of precision and increased maintenance costs. This damage is costly.
Monitoring the flatness of the platens and the quality of the parts helps a maintenance team identify when the machine or the tool requires repair.