Meaning
Progressive volumetric filling trials map plastic melt front advancement through multi-cavity injection mold channels under controlled process conditions. Performing a short shot study identifies flow imbalances and gas trapping locations before establishing final production parameters. The analytical procedure ends once complete cavity filling and packing profiles are established.
Flow Mapping
Process engineers reduce shot volume incrementally to produce partially filled parts across sequential mold cycles. Visual examination of partially filled parts reveals actual runner balance and melt front progression. Technicians document filling patterns using photograph logs and cavity weight measurements.
Filling Analysis
Step-by-step volumetric expansion exposes localized flow restrictions that cause weld line defects or air traps. Observing where polymer flow hesitates in thin wall sections allows mold makers to modify steel dimensions prior to production signoff. Relying solely on fill simulation software misses flow variations caused by tool thermal gradients during actual operation.
Correcting steel imbalances identified during partial fill analysis prevents localized over-packing and reduces scrap rates during high-volume manufacturing.
Parameter Validation
Short fill trials validate gate freeze times and runner balance under actual machine dynamics. Process limits established during partial filling assessments govern initial production setup sheets. Full production approval requires combining short fill data with dimensional Cpk verification.