Meaning
Material release of trapped or dissolved gases occurs when non-metallic substances are exposed to high temperatures or vacuum conditions. The phenomenon of outgassing is particularly critical in aerospace manufacturing, where released molecules can condense on sensitive optical lenses, solar panels, or electronic sensors. This behavior dictates the selection of adhesives, sealants, and polymers used in high-vacuum environments.
It is measured by standardized tests that determine total mass loss and collected volatile condensable material.
Material Release
Polymers and composite materials used in space applications must undergo thermal-vacuum baking to purge volatile organic compounds before assembly. If outgassing is not controlled, these organic vapors migrate and condense on cool surfaces, forming a thin film that degrades performance. This chemical release can ruin expensive optical payloads or alter the electrical properties of sensitive circuit boards.
The risk of contamination makes low-volatility materials mandatory for space hardware.
Vacuum Effect
Exposing materials to the deep vacuum of space or a industrial processing chamber accelerates the release of volatile substances. Under these low-pressure conditions, the boiling points of volatile contaminants drop, causing them to vaporize and escape from the material matrix at much lower temperatures than in normal atmosphere. This continuous outgassing can cause the parent material to shrink, become brittle, or lose its structural integrity over time.
Understanding this vacuum behavior allows engineers to design components that maintain their dimension and physical strength throughout the lifetime of the mission.
Prevention Technique
Pre-selection of materials that meet strict standards is the most effective way to prevent contamination. Standard tests such as astm e595 expose samples to high temperatures in a vacuum to measure volatile loss. Materials that exceed the limits are rejected during the design phase.
This screening protects sensitive instruments during operation.