Meaning
Mechanical components that deform significantly under the influence of gravity or typical clamping forces require specialized metrology and holding strategies. These parts include sheet metal stampings, thin-walled plastic housings, and long slender shafts. Evaluating a non-rigid workpiece requires establishing a datum system that simulates the assembly condition of the part.
Standard inspection procedures must define the sequence of clamp applications to ensure repeatable measurements. This methodology prevents false rejections of parts that are functionally acceptable when bolted into place.
Deformation Analysis
Gravity alone can cause the part to bend beyond its specified tolerances when unsupported. The deformation analysis of non-rigid workpiece calculates the expected deflection using finite element modeling. This analysis helps engineers design fixtures that properly mimic the final assembled state.
Fixture Configuration
Metrologists use multi-point holding fixtures to support the part during measurement cycles. The fixture configuration of non-rigid workpiece must apply just enough force to secure the part without inducing additional strain. If the clamps are too tight, they can mask the natural manufacturing defects.
Tolerance Verification
Part specifications often include both free-state and constrained tolerances to account for flexibility. The tolerance verification of non-rigid workpiece relies on comparing the measured shape against the digital model under simulated assembly forces. This step ensures the part will fit correctly during final production.