Meaning
Intelligent data reduction algorithms adjust the frequency of measurement based on the rate of change in the observed signal. When a value remains stable, dynamic subsampling drops the capture rate to a bare minimum. If the signal begins to oscillate or exceeds a predefined threshold, the system immediately resumes high frequency recording.
Control Logic
Software triggers monitor the variance of incoming sensor data to determine the optimal sampling interval. By applying dynamic subsampling, an edge device avoids recording redundant information during idle periods. The algorithm compares current values against previous readings and calculates the slope of the change.
This mechanism ensures that transient events are captured with full resolution while steady states consume negligible resources.
Storage Management
Local memory on embedded devices fills quickly when recording at kilohertz rates. Implementing dynamic subsampling extends the effective recording duration of a fixed storage drive by several orders of magnitude. This technique allows a logger to stay in the field for a duration of several months.
Production systems use this to maximize the utility of limited on-board flash memory without losing critical diagnostic detail.
Performance Tradeoff
Reducing the number of data points can introduce aliasing if the trigger logic is too slow to respond to a spike. While dynamic subsampling saves power and bandwidth, it requires careful tuning of the wake up thresholds. A failure to detect a rapid shift in voltage or pressure can result in a data gap during a system failure.
Engineers must validate the trigger latency to ensure the capture starts before the event of interest concludes. This validation involves testing the response time against the fastest expected signal transients in a laboratory setting.