Meaning
Structural degradation occurs in metal components subjected to repeated fluctuations of stress over time. Under these conditions, cyclic fatigue cracking progresses from microscopic flaws into larger fractures that eventually cause sudden mechanical failure. This phenomenon typically begins at points of high stress concentration, including sharp corners or welds.
The process applies to materials under tension but not to those under uniform compression.
Degradation Path
Initiation of fractures begins when localized micro-plastic deformation accumulates at the surface of a metal component. Microscopic slips along crystalline planes form bands that gradually develop into micro-cracks. As stress continues, the crack propagates perpendicular to the tensile force, leaving beach marks that denote different stages of growth.
Once the crack reaches a critical depth, the propagation speed increases exponentially. Final failure happens abruptly when the remaining intact cross-section cannot sustain the applied peak load.
Stress Evaluation
Engineering assessments measure the amplitude and frequency of dynamic loads using strain gauges or finite element analysis models. Designers apply the Paris law to estimate the remaining useful life of a part under these loads. Measuring stress levels during early prototype testing avoids costly redesigns during production.
A low fatigue limit indicates that the component will fail long before its planned operational cycle.
Mitigation Strategy
Surface treatments including shot peening introduce compressive residual stresses that arrest crack propagation. Choosing materials with high fracture toughness prevents rapid growth.