Meaning
Aerospace standard for the validation of passivation treatments on stainless steel parts specifies the tests required to confirm surface chemistry. Adherence to ams 2700 acceptance ensures that the protective oxide layer is uniform and free from free iron. This verification occurs after the chemical bath and before final assembly.
Passivation Quality
Chemical verification of the surface prevents future corrosion by confirming the removal of exogenous materials. Achieving ams 2700 acceptance requires strict control over the acid concentration and the immersion time in the bath. A failed test indicates that the part must be reprocessed to restore its corrosion resistance.
Verification Method
Verification begins with a copper sulfate test to find free iron or a water immersion test to check for rust. For some alloys the ams 2700 acceptance is confirmed through high humidity exposure or salt spray cycles. High magnification inspection follows to ensure that no pitting or etching occurred during the acid treatment.
The presence of any pink or red deposits on the surface during the copper sulfate test is cause for rejection. Each batch of parts is documented with the specific test parameters used to meet the standard.
Deployment Readiness
Reliable surfaces are essential for hardware exposed to hydraulic fluids and deicing chemicals. Successful ams 2700 acceptance provides the necessary assurance for components used in high pressure aircraft systems. Verification of these properties is required before a batch is cleared for use in flight critical systems.