Meaning
Internal thermal energy generation caused by molecular fluid friction during high-shear polymer flow raises melt temperature inside runner systems and narrow mold gates. Process engineers harness viscous heat dissipation to lower effective resin viscosity without increasing barrel heater zone settings. Shear heating effects increase exponentially with injection velocity and polymer viscosity.
Fluid Friction Physics
Mechanical energy supplied by the injection screw converts to thermal energy as polymer chains slide past one another in tight restriction channels. Relying on viscous heat dissipation allows high-speed injection molding machines to fill thin-walled geometries efficiently. Uncontrolled shear heating raises localized melt temperatures above resin degradation thresholds.
Energy dissipation depends directly on shear rate and fluid viscosity.
Production Flow Capability
Machine audit runs measure temperature rise across injection nozzles to quantify shear heating contributions at maximum injection speeds. Process trials evaluate whether calculated viscous heat dissipation provides sufficient viscosity reduction without inducing thermal degradation in sensitive resins. Ignoring shear heating in tool design leads to unexpected thermal degradation, gas burns, and material discoloration near small gates.
Supplier melt flow index measurements conducted at low shear rates fail to predict the dramatic temperature increases that occur during high-velocity commercial molding. Controlling injection speed profiles stabilizes melt temperature as resin flows through complex runner networks.
Degradation Limit Boundary
Excessive shear rates break molecular chains and degrade polymer mechanical properties severely. Over-reliance on viscous heat dissipation causes localized thermal degradation, gas off-gassing, and part weakness near gate entrances. Shear thresholds define safe processing velocity windows.
Maximum flow rates limit shear generation.