Meaning
Heat-induced changes in the refractive index of a medium cause a laser beam to focus or defocus as it passes through an absorbing element. These variations occur when a small fraction of light energy is absorbed by the optic and converted into a temperature rise. Photothermal thermal lensing tracks the beam distortion resulting from energy absorption in optics.
The application stops being the primary distortion factor once active cooling systems stabilize the temperature of the optical element.
Distortion Mechanism
Absorption causes the center of the optic to expand more than the edges, creating a positive lens for most glass types. Because the effect is power-dependent, photothermal thermal lensing becomes more severe as the laser intensity increases toward production levels.
System Impact
Changes in the beam waist location reduce the cutting efficiency of industrial lasers and can damage internal components. Monitoring the focal shift allows the control software to adjust the mirror positions to compensate for the drift.
Production Yield
Industrial readiness requires optics with ultra-low absorption coatings to minimize the onset of photothermal thermal lensing. Testing the thermal response of a supplier’s sample during the pilot phase ensures the final machine maintains its specified throughput during continuous operation. The cost of calling an optic ready for high-power use early is the risk of catastrophic thermal runaway during the first production run.