Meaning
Capability of a measurement system to detect minute changes in the phase of an electromagnetic wave governs the precision of interferometric sensors. This metric determines the smallest optical path difference that the sensor can reliably distinguish from background fluctuations. High-precision industries rely on this parameter to monitor thin-film thickness and surface roughness.
Signal Detection
Interferometers split a coherent beam into a reference path and a measurement path to observe phase shifts. The phase sensitivity of the system depends on the stability of the light source and the noise performance of the detectors. If the system is highly sensitive, it can resolve path variations smaller than the diameter of a single atom.
System Noise
Environmental factors such as temperature drift and acoustic vibration can mask the phase changes under measurement. To achieve maximum phase sensitivity, the optical setup must be isolated on a pneumatic table within a temperature-controlled room. If these noise sources are not managed, the measurements become unreliable and the system fails to meet its specifications.
Calibration Routine
Engineers perform daily checks using a reference sample with a known step height to verify the system response. This procedure involves scanning the sample and comparing the measured phase shift against the expected value. If the calibration yields a lower sensitivity than required, the optical alignment and laser power are adjusted.
This systematic check maintains the accuracy of high-throughput testing in semiconductor fabs.