Meaning
Statistical dispersion of mass measurements obtained from a succession of injection-moulded components produced over continuous production cycles indicates total process stability. This part weight spread captures volumetric shot variability resulting from check ring leakage, melt density inconsistencies, and hydraulic or electric injection stroke deviations. The evaluation scope covers whole-shot or single-cavity part mass across extended temporal production intervals, stopping short of local intra-part density distribution analyses.
Mass Distribution
Analytical balance recordings quantify the spread of component mass, revealing machine dosing and non-return valve dynamics. A tightly grouped part weight spread demonstrates reliable switchover from velocity control to pressure hold, as well as consistent melt compression inside the screw flights. When non-return valves experience inconsistent mechanical seating, backward resin leakage during injection expands the mass variance window.
Monitoring weight distributions isolates mechanical machine errors from environmental mold temperature drifts.
Production Readiness
Capability evaluation protocols mandate continuous sampling across pilot campaigns to calculate short-term and long-term process spread indices. Process approval requires part weight spread distributions to fall comfortably within upper and lower specification limits, confirming that non-return valve shutoff repeatability meets precision moulding tolerances. Accepting prototype tooling runs without tracking part weight spread masks mechanical check-ring slippage, which surfaces later in high-speed manufacturing as chronic flash or intermittent short shots.
The demonstrated spread provides baseline proof that hydraulic pressures and screw rotational recovery remain within acceptable tolerance bands.
Operating Constraints
Resin drying parameters and molecular weight variance across raw material lots alter polymer melt viscosity and affect overall mass spread. Regrind additions broaden the weight dispersion curve by introducing non-uniform bulk density and variable plastification rates inside the barrel. Temperature fluctuations along the barrel heaters directly alter melt compressibility, shifting the mass curve over hours of continuous cycling.
Stable process windows require minimal part weight spread before closed-loop feedback controllers can effectively trim holding pressures.