Meaning
Non-contact optical radiometry measures infrared radiation emitted by a material surface to calculate its thermodynamic temperature. Quality control systems use ir pyrometry to monitor extrudate surface temperatures immediately upon exiting the die face without disturbing the delicate polymer profile. The measurement relies on Planck’s law of thermal radiation, converting spectral radiance into accurate surface temperature readings.
Optical sensing functions effectively across exposed web or profile surfaces but cannot read internal core melt temperatures inside opaque metal flow channels.
Surface Sensing
Infrared photodetectors capture emitted radiation within specific infrared wavelength bands focused on moving polymer melt. Employing ir pyrometry during profile extrusion enables continuous monitoring of skin cooling rates along calibration sleeve entries. Surface readings reveal instant thermal variations caused by air gap fluctuations or melt pump instability.
Sensor alignment must maintain a fixed optical distance and angle relative to the target.
Emissivity Calibration
Accurate temperature determination depends on setting the exact radiation efficiency factor matching the polymer chemistry and surface finish. Adjusting ir pyrometry equipment requires calibrating emissivity against physical surface probe measurements during baseline setup. Polymer additives and surface roughness changes alter infrared emission behavior.
Routine calibration audits ensure temperature reading accuracy during polymer grade changes.
Response Speed
Relying on slow immersion thermocouples for extrudate monitoring permits undetectable thermal spikes that cause web breaks or film sag. Incorporating ir pyrometry provides sub-second detection of temperature fluctuations, enabling automated feedback loops to adjust line speed or cooling air. Delayed detection allows out-of-spec material to accumulate undetected in winding rolls.
High-speed optical sensing protects product yield during high-output production.