Meaning
The mathematical measure of heat transfer capability across the junction of two solid bodies defines the efficiency of thermal management systems. In high-speed manufacturing, interfacial thermal contact conductance governs the speed at which heat leaves a part and enters the mold wall. This value depends heavily on the microscopic roughness of the surfaces and the pressure holding them together.
It reaches a maximum when the two surfaces are perfectly flat and pressed together with high force, though such a state is rarely achieved in production environments.
Pressure Sensitivity
Increases in the clamping force or injection pressure typically improve the thermal flow between the polymer and the steel. As these pressures rise, the interfacial thermal contact conductance climbs because more points of contact are established at the microscopic level. This relationship is non-linear and tends to plateau once the peaks of the surface roughness have undergone plastic deformation.
Accurate measurement of this effect is required to predict cooling times.
Contact Resistance
Every physical junction introduces a barrier to heat flow that is the inverse of the conductance value. While a metal-to-metal contact might seem perfect, microscopic air gaps act as insulators that hinder the process. Minimizing these gaps through surface finishing improves the interfacial thermal contact conductance.
A supplier’s forecast of heat transfer often ignores these boundary effects.
Heat Transfer
Thermal energy moves through the contact points via solid conduction and across the gaps via radiation or gas conduction. In a rapid production run, the conduction through solid contact points remains the primary mechanism for cooling. The cost of overestimating this value is a production yield that falls short of the target due to overheated parts being ejected too early.
Understanding this conductance is necessary for scaling from a laboratory prototype to a high-volume production line where every second of cooling time impacts the total cost.