Meaning
Process optimization in injection molding defines a range of acceptable injection speeds that produce complete parts without causing material degradation or cosmetic defects. This range, referred to as the fill time window, balances the need to avoid short shots at slow speeds against the risk of shear burning at high speeds. It changes with mold temperature, gate size, injection pressure, and resin viscosity.
When establishing a new tool, engineers map this region to guarantee that daily fluctuations in environmental conditions or raw material batches will not push the run into defect territories.
Velocity Constraint
Viscous heating increases when plastic is forced through a small opening at high speeds. Within the fill time window, the maximum injection speed is limited by the temperature at which the polymer starts to degrade. Conversely, the minimum speed is constrained by the freezing of the flow front.
Material Sensitivity
Shear-sensitive materials have a narrow range of viable fill rates. If the fill time window is too tight, small variations in ambient temperature or batch-to-batch polymer viscosity can cause high scrap rates. A wide window ensures a stable, repeatable manufacturing process that can withstand daily variations.
Process Yield
Operating outside the calculated range results in high scrap rates. High pressure can cause flashing or sink marks on the part surface. Low speeds lead to incomplete filling of thin walls.
Thus, establishing these boundaries early protects the production line from unexpected downtime and reduces the frequency of operator intervention.