Meaning
Rheological measurement utilizes a narrow rectangular passage equipped with pressure transducers to calculate the flow resistance of a melt. Slit die viscometry provides an alternative to circular capillary methods by allowing for flush mounted sensors that do not disturb the flow. This configuration is useful for studying the behavior of polymers in conditions that mimic the flat sections of a mold or an extrusion die.
It allows for the direct measurement of wall shear stress without the need for complex entrance corrections.
Channel Geometry
The aspect ratio of the slit must be large enough to ensure that the flow is essentially two dimensional. In slit die viscometry, the width is usually at least ten times the height to minimize the influence of the side walls.
In Line Measurement
Integration of the die directly onto an extruder or injection unit enables real time monitoring of material quality. Slit die viscometry captures the viscosity of the melt as it is being processed, which accounts for the actual moisture content and thermal history. This provides a more realistic picture of the material than a separate lab test.
Processors use this data to adjust machine settings on the fly to maintain consistent part quality. Constant monitoring of the pressure drop allows for the detection of batch to batch variations in the raw resin.
Data Interpretation
Calculating the viscosity requires measuring the pressure at multiple points along the length of the channel. The slope of the pressure profile in slit die viscometry gives a direct reading of the shear stress. Because the transducers are flush with the wall, there is no hole pressure error.