Meaning
Dimensionless ratios in polymer fluid dynamics measure the relation between elastic forces and viscous forces during deformation. A high Weissenberg number indicates that the polymer relaxation time is much longer than the characteristic deformation time of the process. In this regime, the polymer molecules do not have sufficient time to relax, causing them to accumulate elastic energy and exhibit highly non-linear flow behavior.
Elastic Dominance
Characterizing the behavior of polymer melts during high-speed extrusion involves calculating the ratio of elastic stress to viscous stress. When operating at a high Weissenberg number, the flow exhibits unusual phenomena such as die swell and melt fracture. Flow simulations must employ specialized viscoelastic models to predict these behaviors, as standard Newtonian assumptions fail completely in this regime.
Flow Instability
Transitioning a polymer process from pilot scale to commercial production speeds often raises the deformation rate and drives the system into a high Weissenberg number state. This shift can trigger catastrophic flow instabilities that distort the extruded product and ruin the surface finish. To prevent these defects, engineers perform shear runs to determine the critical threshold where flow becomes unstable.
Calling the process ready for high-speed production without establishing this boundary risks high reject rates and wasted material during start-up.
Production Impact
Managing polymer elasticity requires optimizing the die geometry or using process aids to reduce shear rates. While a laboratory run might show excellent properties at low speeds, high-volume throughput demands careful control of elastic stress. Running at a high Weissenberg number demands advanced equipment design to maintain product consistency.