Meaning
Statistical evaluation methods determine the repeatability and reproducibility of a measurement system when the parts being measured are in motion or undergoing transformation. A dynamic gauge r and r test measures how much of the observed process variation is due to the measurement tool itself versus the production process. This assessment is necessary for automated inspection systems on high-speed conveyor lines.
Testing Procedure
Operators run a series of parts through the inspection station multiple times to check for consistent results. The dynamic gauge r and r isolates the error introduced by the sensor from the natural variation in the manufactured product. High values in the reproducibility category suggest that different shifts or environmental conditions are affecting the data.
Quality Threshold
Standards for automotive or aerospace manufacturing usually require the measurement error to be less than ten percent of the total process tolerance. A dynamic gauge r and r score above thirty percent indicates that the measurement system is not capable of distinguishing between good and bad parts. Investing in better sensors or more stable mounting hardware reduces this error.
Production Impact
Validating the measurement system before a full production run prevents the accidental rejection of quality parts. If the dynamic gauge r and r fails, the entire inspection setup must be re-engineered. This might involve increasing the frame rate of cameras or improving the lighting at the inspection point to ensure that the motion of the parts does not interfere with the sensors.
A successful study proves that the facility can rely on automated data for process control.