Meaning
Dimensionless statistical measures of relative dispersion express the ratio of standard deviation to the arithmetic mean for a given distribution. In operations analysis, coefficient of variation normalises process variability across machines with unequal cycle times. The metric isolates true operational inconsistency from scale effects, providing a baseline for comparing assembly stations or supply lines.
Its utility ends where the distribution mean approaches zero, as the resulting ratio becomes mathematically unstable.
Dispersion Ratio
Calculation of the metric divides the standard deviation of processing time by the mean processing time across a measured lot size. A low coefficient of variation indicates highly repeatable task completion, typical of mature automated tooling. High values identify irregular cycle durations caused by manual adjustments, thermal drift, or frequent micro-stoppages.
Production lines operating with values above 0.75 experience severe queuing delays even when average capacity appears sufficient on paper.
Industrial Consequence
Early evaluation during pilot testing separates natural tooling scatter from systemic mechanical instability. When a supplier reports high mean throughput, an elevated coefficient of variation signals hidden starvation risk for downstream machinery. Unchecked variance forces production planners to inflate buffer inventories between workstations to prevent starvation.
Ramp audits rely on this dispersion metric to determine whether an automated cell achieves the stability required for continuous series production.
Production Boundary
Factory floors apply this metric primarily to stationary automated cycles and arrival rate intervals. Non-stationary operations undergoing continuous engineering modifications distort the calculated values. When cycle times follow multimodal distributions due to mixed-product assembly, the metric loses its descriptive power unless segmented by distinct part numbers.
The coefficient of variation remains the baseline criterion for validating machine repeatability before signing final commissioning documentation.