Meaning
High-precision optical metrology of semiconductor wafers and optical elements employs a split-beam configuration where both the reference and the measurement arms share the same physical trajectory. Implementing common path interferometry minimizes the impact of environmental vibrations and thermal fluctuations that typically degrade the signal in conventional dual-path systems. This stability allows for highly repeatable sub-nanometer surface profiling in active production environments.
It provides the nanometer-scale resolution necessary for inline inspection.
System Architecture
Separation of the reference and measurement waves occurs at a single optical element located close to the target surface. In this arrangement, common path interferometry utilizes a birefringent crystal or a diffraction grating to generate the two co-propagating beams. Vibration affects both beams equally.
Metrology Yield
Sensitivity to phase variations remains exceptionally high while sensitivity to common-mode acoustic noise is virtually eliminated. When integrating common path interferometry into an automated defect inspection line, this noise rejection translates directly to higher measurement throughput. High yield is maintained.
Vulnerability Limit
Performance degrades when the specimen surface possesses steep slopes or high-frequency roughness that scatters the reference beam excessively. For these complex topologies, common path interferometry requires precise alignment and spatial filtering to avoid signal loss. The measurement fails if the scattered light cannot be captured.