Meaning
Radial deformation of tool steel walls during high-pressure fluid or molten polymer injection alters mold internal dimensions during the fill cycle. Injection molding qualification protocols measure cavity expansion to ensure finished plastic components remain within required dimensional tolerances. Elastic recovery analysis stops applying when internal hydraulic pressures exceed the yield strength of the mold material.
Volumetric Displacement
High internal melt pressure drives flexible cavity walls outward, temporarily increasing total internal volume. Tool designers assess cavity expansion during prototype trial runs to prevent flash formation along parting lines. Finite element simulations often assume perfectly rigid mold structures, underestimating wall displacement during peak packing pressure.
Production tooling requires rigid support pillars to limit wall deflection under high cycle rates.
Pressure Distribution
Fluid pressure acts normal to every internal mold surface during the packing phase of production. Engineers monitoring cavity expansion track how pressure gradients decay as polymer solidifies along the cold metal boundary. Non-uniform packing pressure produces localized deformation, resulting in warped parts and uneven wall thicknesses across large moldings.
Sensors embedded in the tool cavity provide real-time feedback to control hydraulic packing force.
Dimensional Variation
Part geometry changes when tool steel snaps back after part ejection. Uncontrolled cavity expansion leads to out-of-spec production parts despite precise initial mold machining. Correcting tool dimensions requires empirical validation runs rather than theoretical estimates.