Meaning
Damage to the sharp edges or arrises of concrete joint slabs is common in high-traffic industrial settings where heavy wheeled vehicles operate. Restoration of these damaged edges, referred to as arris spalling repair, involves cutting away the loose material and filling the recess with a polymer-modified mortar or epoxy resin. This process re-establishes a flush, continuous floor surface that prevents further impact damage from forklift wheels.
The repair is limited to the joint margins and does not address deeper structural failures of the slab itself.
Edge Restructuring
Joint reconstruction begins with a straight saw cut behind the damaged zone to create a vertical shoulder. This saw-cut boundary prevents thin feather-edges in the patch material, which would otherwise flake off under the weight of traffic.
Repair Durability
Selecting the repair compound requires matching the compressive modulus of the patching material with that of the surrounding concrete. When the compound is too rigid, thermal expansion generates high shear stresses along the bond line, causing the repair to delaminate during standard operational cycles. Conversely, a material that is too flexible deforms under heavy wheel loads, exposing the concrete arris to direct impact and reinitiating the spalling cycle.
Measuring the cure rate under real floor temperatures ensures the compound achieves its full compressive strength before traffic is restored.
Mechanical Performance
Evaluating the repaired joint under dynamic axle loading confirms that the new edge survives without micro-fracturing. If the repair is opened to traffic too early before full curing, the soft resin shifts and the slab margin receives unmitigated impacts. A finished repair must withstand the highest anticipated forklift wheel loads to confirm that joint continuity has been successfully restored.