Meaning
Industrial wear occurs when solid surfaces degrade under the repeated impact of abrasive particles suspended in a flowing liquid. In hydraulic transport and pump systems, abrasive slurry erosion represents a significant threat to pipe walls and impellers. The mechanism combines hydrodynamic shear and mechanical scraping, which gradually strips the protective oxide layers and the base metal.
This action occurs primarily in pipelines carrying mining tailings or sand mixtures.
Degradation Mechanism
Impinging particles within the liquid medium strike the substrate at various angles to cause micro-cutting or plastic deformation. Low-angle impacts produce scratching that materialises as elongated grooves, whereas high-angle impacts cause localized fatigue and surface cracking. The rate of abrasive slurry erosion depends heavily on the hardness ratio between the abrasive mineral and the target metal.
When this ratio exceeds unity, the degradation rate accelerates. Additionally, the size distribution of the abrasive grains influences the volume of metal removed per unit of time, as larger grains possess greater momentum and penetrate deeper into the metal matrix. This deeper penetration overcomes the elastic recovery of the surface layer.
Environmental Factor
Temperature changes and liquid acidity alter the material loss rate by accelerating the corrosion that accompanies physical wear. High flow velocities concentrate the kinetic energy of the suspended solids against the metal, which increases the frequency of impacts. In turbulent flow regimes, boundary layer thickness decreases, which permits larger grains to strike the boundary directly.
These dynamic interactions are particularly severe in pipe elbows and diameter transitions.
Preventive Measure
Protective strategies focus on lining vulnerable components with resilient elastomers or utilizing hard-facing alloys that resist gouging. Rubber linings absorb the kinetic energy of the particles and reduce localized strain. In contrast, high-chromium cast irons resist wear through the presence of hard eutectic carbides.
Adjusting the flow velocity below the critical settling speed also minimizes abrasive slurry erosion without causing blockages.