Meaning
Imaging systems face physical limitations on the size of their physical aperture, which restricts their maximum spatial resolution. The technique of synthetic aperture overcomes this limit by combining measurements from multiple positions or angles to synthesize a much larger effective aperture. It allows the system to achieve the resolution of a large aperture using only a small, movable physical sensor.
This technique is applied in radar, sonar, and optical microscopy.
Data Acquisition
Implementing a synthetic aperture requires capturing both the amplitude and the phase of the signal at each sensor position. In radar and sonar, this is achieved through coherent detection, while in optical microscopy, it requires phase retrieval or interferometric techniques. The sensor is moved along a known trajectory, and the recorded signals are stored for subsequent digital processing.
The trajectory must be known with high precision to avoid phase errors.
Phase Consistency
Coherence of the source is a requirement for synthesizing a larger aperture, as any phase fluctuations between measurements will degrade the reconstructed image. If the phase relationship between different sensor positions is lost, the signals will not interfere constructively, and the resolution will revert to that of the physical aperture. Therefore, highly stable sources and precise phase correction algorithms are required to maintain consistency.
This constraint is particularly challenging in optical systems due to the very short wavelengths involved.
Computational Synthesis
Digital reconstruction algorithms combine the collected signals by back-projecting or Fourier-transforming them into a single high-resolution image. This process involves shifting and summing the signals to emulate the focusing effect of a large physical lens. The computational cost is high because of the large amount of data and the complexity of the phase-matching calculations.
In practice, fast Fourier transform algorithms and parallel processing are used to accelerate the reconstruction process, enabling real-time imaging in some advanced applications. This processing stage must also correct for any non-linearities in the sensor’s motion or the propagation medium.