Meaning
Mathematical formulations of thermal contact conductance evaluate how heat flows across the interface of two conforming rough surfaces in contact under load. The cooper mikic yovanovich model provides a predictive framework for this interface behavior by assuming plastic deformation of surface asperities. It links the mechanical properties and surface finish of the contacting metals directly to their joint thermal conductance.
The model applies primarily to situations where the mean contact pressure remains low relative to the microhardness of the softer material. Practitioners use this approach during thermal packaging design for aerospace electronics, where vacuum environments eliminate air conduction and force all heat to pass through solid micro-contacts.
Surface Geometry
Surface profiling tools measure the arithmetic mean height and the mean slope of the asperities before assembly. In the cooper mikic yovanovich model, these geometric parameters combine with the applied contact pressure to determine the fractional contact area. This calculation relies on a Gaussian distribution of asperity heights across the interface.
The resulting values indicate how many microscopic points actually touch and transmit heat.
Deformation Mechanism
Material hardness governs the plastic yielding of the microscopic peaks when the surfaces are pressed together. Under the cooper mikic yovanovich model, the real contact pressure at the micro-contacts equals the microhardness of the softer material. This plastic deformation ensures that the asperity contact area is directly proportional to the applied load.
The thermal conductance of each contact point then scales with its contact spot size.
Application Limit
Experimental validation indicates that the model begins to deviate when contact pressures approach the bulk yield strength. Highly polished surfaces also present a challenge because the assumed random Gaussian asperity distribution breaks down. Under these conditions, wave-like macro-deviations dominate the thermal resistance instead of micro-asperity contacts.
The model remains highly reliable for ground or cast finishes under moderate clamping forces.